
E-M-HP23-V2_13
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroPalm HP23-A / HP23-AW-A hand-held
indicator:
User Guide
Instruction Manual
Document Type
Page
13 of 37
Document title
© 2009-2012; Rotronic AG E-M-HP23-V2_13
4.3 ON/OFF key
The ON/OFF key is used as follows:
o To turn the instrument on: press the ON/OFF key
o To turn the instrument off: press the ON/OFF key for more than 1 second
o To activate the HOLD function: press the ON/OFF key briefly (less than 1 second)
o To deactivate the HOLD function: press the ON/OFF key briefly (less than 1 second)
4.4 HOLD function
When the HOLD function is active, the word “HOLD” appears at the bottom of the LC display on the line where
the date and time are normally displayed.
The display is frozen and shows the values that were either last measured or last calculated at the time the
ON/OFF key was pressed. All functions such as data logging, data capture, probe adjustment, etc. are also
frozen. Likewise, communication with the ROTRONIC HW4 software is frozen. The HP23 menu can still be
used to change the display mode, but the values are not updated. The HOLD function is automatically ended
whenever the instrument is turned off. The values that were displayed while the HOLD function was active are
not memorized and are lost.
The HOLD function is not available when the Aw Mode is enabled. Enabling the Aw Mode automatically ends
the HOLD function.
WARNING: when the HOLD function is active, functions such as data logging and probe adjustment from the
keypad should not be used because both the measured and calculated values are no longer updated.
4.5 Internal menu
Note: Unauthorized access to the menu can be prevented by disabling “display menu”
(use the HW4 software > Device Manager > Display)
Main Menu Menu Items
Selections or
Information
Notes
Battery
Trend indication on the
display
LC display contrast
adjustment
H+T+Calc
See 4.1.1
Comments to this Manuals