Rotronic MP100A User Manual download pdf (Page 17)

Calibration steps:

1. Unscrew the lower part (cup) of the calibration device.

2. Unscrew the probe's sensor protector and screw the calibration device

onto the probe. Proceed carefully so as not to damage the sensors!

3. Remove the 3 small screws on the probe housing and take out the

print.

4. Insert a textile pad in the cup.

5. Shake the ampoule until the entire fluid is in the thick part of the

ampoule.

6. Break off the neck of the ampoule at the fracture point (white line) and

empty the entire contents into the centre of the textile pad (you may

have to knock it a little).

7. Screw the cup immediately into the calibration device from below.

8. Place the calibration device on the insulating surface and leave it for

at least 1 hour.

9. Check the display; if necessary readjust on the associated potentio-

meter with a small screwdriver (see diagram).

10. Remove cup from the calibration device.

11 . Remove the textile pad and dispose of with the household rubbish.

(The textile pads are designed for single use only and must not be

reused under any circumstances.)

12. Wash the cup out thoroughly under running water and dry it carefully.

13. According to which calibration method you have chosen, repeat the

process from item 4 to 12 with the corresponding humidity standards.

14. Push the print back into the housing and screw tight.

15. Remove the calibration device carefully and attach the sensor protector again.

6.3 Contamination

Contaminated filters can cause measuring errors and prolong the adjustment time. Depending upon the

degree of contamination of the filter, it must be cleaned or if necessary replaced periodically.

In order not to damage the sensors, unscrew the filter for cleaning. Clean the filter with soapy water,

alcohol or a cleaning agent suitable for removing contamination and rinse thoroughly with water. Do not

screw the filter back onto the probe until it is completely dry. Replace filters which can no longer be

cleaned with new ones. Should the sensors be severely contaminated despite of the protective filter, we

recommend having these replaced by our service department.

7. Accessories and spare parts

Please be sure to use only ROTRONIC original accessories and spare parts from our current sales

catalogue "HUMIDITY AND TEMPERATURE MEASUREMENT".

8. Technical data MP 100A series

Humidity sensor ROTRONIC-HYGROMER

IN-1

Temperature sensor RTD Pt 100 1/3 DIN

Operating ranges: Humidity 0...100%RH Temperature -40...+60°C

Accuracy at 23°C:

Humidity:

Temperature:

±1 %RH (5...95 %RH) ± 2% RH < 5 %, > 95 % RH)

±0.3 °C

Reproducibility

Humidity

Temperature

< 0.5% RH

< 0.l°C

Long term stability for humidity

typical under normal conditions

< 1 % RH/year

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Shuttle SX38P2 Fiche technique (6 pages)

marque: Shuttle | Catégorie: PC/workstation barebones | Taille: 0.50 MB |

Table des matières

SX38P2 Pr

Product Specification

Plus de produits et de manuels pour PC/postes de travail Shuttle

Modèles	Type de document
PC-D10001	Fiche technique Shuttle D10 barebone, 6 pages
XPC-SD30G2SP	Fiche technique Shuttle SD30G2, 3 pages
SN78SH7	Fiche technique Shuttle SN78SH7 barebone, 6 pages
XPC-SX38P2	Fiche technique Shuttle SX38P2 Pro, 6 pages
PC-D1416001	Fiche technique Shuttle D 1416S Surveillance System, 8 pages
SX48P2E	Fiche technique Shuttle SX48P2 E, 2 pages
PC-X27001	Fiche technique Shuttle X27 Black, 5 pages
SD10001	Fiche technique Shuttle D10, 6 pages
SA76G2	Fiche technique Shuttle SA76G2 barebone, 6 pages
SK45001	Fiche technique Shuttle K45, 5 pages
SG31G2V2B	Fiche technique Shuttle SG31G2V2, 5 pages
SG33G5M	Fiche technique Shuttle XPC Barebone Black, 5 pages
SX58H7	Fiche technique Shuttle SX58H7 barebone, 7 pages
SD32G2	Fiche technique Shuttle SD32G2 barebone, 3 pages
SD30G2SP	Fiche technique Shuttle XPC Barebone Silver, 3 pages
SK21G	Fiche technique Shuttle XPC Barebone SK21G, 2 pages
SN26P	Fiche technique Shuttle SN26P SFF Barebone, 2 pages
K45S	Fiche technique Shuttle K45S barebone, 5 pages
XPC-SG45H7	Fiche technique Shuttle SG45H7 barebone, 6 pages
SG41J1P41	Fiche technique Shuttle SG41J1 Plus V2, 8 pages

Rotronic MP100A User Manual Page 17

Comments to this Manuals

Shuttle SX38P2 manuels

Shuttle SX38P2 Fiche technique (6 pages)

Table des matières

Plus de produits et de manuels pour PC/postes de travail Shuttle

Rotronic MP100A User Manual Page 17

Comments to this Manuals

Related products and manuals for Tools Rotronic MP100A

Shuttle SX38P2 manuels

Shuttle SX38P2 Fiche technique (6 pages)

Table des matières

Plus de produits et de manuels pour PC/postes de travail Shuttle