Rotronic HF5 User Manual download pdf (Page 8)

E-M-HF5-V1_25

Rotronic AG

Bassersdorf, Switzerland

Document code

Unit

HygroFlex HF5 Humidity Temperature

Transmitters: User Guide

Instruction Manual

Document Type

Page

8 of 30

Document title

4.1 Function overview

MEASUREMENT ACCURACY AND RELIABILITY (PROBE FUNCTIONS)

AirChip 3000 Functions

Description

► Humidity / temperature adjustment

o 1-point or multi-point humidity calibration or adjustment

o 1-point or 2-point temperature calibration or adjustment

o Generate a time stamp for calibrations and adjustments

o Retain and view last adjustment date and adjustment values

o Generate calibration and adjustment protocols

► Automatic humidity sensor test

and optional drift compensation

Tests the humidity sensor for drift caused by contaminants and

can be used to automatically apply a correction. The test is

automatically carried out at regular intervals of time. Can be

configured, enabled, or disabled

The humidity sensor status can be verified either with the HW4

software or with the instrument display (if available) and is

shown as Good, SQ-tuned (corrected for drift) or Bad (defective)

Not available when the probe is connected to a HF52

► Data recording

The data recording function differs from a true data logging

function in the sense that the AirChip 3000 does not time stamp

the data. The data recording function can be use to investigate

events such as a sensor malfunction as well as to retrieve data

that would otherwise be lost

o Start or stop data recording - up to 2000 value pairs (%RH

and temperature). Starting a recording session erases all

previously recorded data

o The recording mode and log interval can be specified

o When the device is powered off, the recording session is

paused but not ended As long as the recording session has

not been ended, the device automatically resumes recording

data when powered up again

o The recorded data can be downloaded to a PC with the

HW4 software, time stamped and viewed

Not available when the probe is connected to a HF52

MEASUREMENT LOOP VALIDATION

Functions

Description

► Simulator mode

Used to make the HF5 generate fixed values for the humidity,

temperature and calculated parameter. Can be configured,

enabled or disabled

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Comments to this Manuals

No comments

Rotronic HF5 User Manual Page 8

Comments to this Manuals

Related products and manuals for Accessories for electrical Rotronic HF5